This shop uses cookies and other technologies so that we can improve your experience on our sites. | close |
Log in
Amazon login
We present a new series of Akurat Lighting D-Soft LED panels with permanently installed high efficient diffusing optical system.
The use of innovative diffusion materials allowed to obtain unbeatable photometric parameters. High performance is a significant energy saving. Perfect diffused light gives a lovely soft shadows, without a matrix structure.
D32 is a model size 4 times the panels D8. Measuring 102 × 51 cm aluminum illuminator is equipped with two sets of highly efficient high-CRI SMD LEDs. Such a design, combined with a microprocessor-based controller, provides brightness and colour temperature adjustment capabilities. D32 outputs up to 36000 lumens at 400W of power consumption. Only AC power is allowed. DMX control in option.
Version with an extension of G – D32G is additionally equipped with a +/- G adjustment that allows tuning of the hue of light to the vision of the cinematographer or to the ambient.
We offer customized production of such or similar big illuminators up to dimension of 200×100 cm and power to 1600W. This offer is addressed specially for rental companies or big production studios.
Basic technical data:
Excellent photometric performance D-SOFT owes to the use of advanced materials for the construction of the optical system. It consists of a diffusion film of a high permeability and the structure of micro-lenses placed in front of LEDs, whereas the low-lossy reflector of a high diffusion is located behind the diodes. Proper combination of these materials guarantee beautiful soft light with a high intensity.
In the back of D32 there is a control panel consisting of buttons for device operation, a display for indicating current per cent brightness setting and current colour temperature expressed in kelvins, diodes signalling the operation mode,battery seats (optional) and mains power supply socket. Controllers of D32 lights have a non-volatile memory for three panel presets that include brightness and colour temperature settings. Calling the presets from individual memory units is done by pressing the related memory buttons; storing a preset requires holding the chosen button pressed for a while. Indicators found next to the buttons signal the use of memory.
The optionalDMX512 controller enables to control the light remotely in television studios or when the light is hard to reach.
D32G control panel consists of buttons for device operation, and a display for indicating current percent brightnesssetting, current colour temperature expressed in kelvins and additionally the +/- G correction value. The driver allows the +/- G correction in 127 steps. Zero on the display means no correction, +63 represents the maximum shift of hue towards green, – 63 represents the maximum shift of hue towards purple.
Four controllers are powering four parts of D32 illuminator independently. One driver is equipped with a control panel. Others work in slave mode and perform tasks ordered by the master controller. Illuminators D32 and D32G can operate only with AC 110-240V power. The modular design allows us to produce custom panels of up to 200 × 100 cm with power up to 1600W.