ULA-1 Water Resistant On-Camera Light for Hard Work
Placing the LED matrix on the hinge with adjustable frictional force, makes possible to tilt the lamp, but also to fold the matrix to a horizontal position to facilitate movement operator with the camera with the light and prevent mechanical damage of the fixture and the camera.
The lamp is made in IP55 ingress protection class, which means the total resistance to rain and dust. The mounting adapter of ULA-1 fixture is compatible with the Akurat 10mm® fastening system. You can configure the light to be attached to the camera or to other accessories, selecting the appropriate elements from the wide list of the fixing accessories of this system.
The light is equipped with brightness and colour temperature controllers and a power switch. Sealed movable controls and power connection are high-quality industrial components for durability and high reliability. The industrial 4 pin M8 standard connector is used to power ULA-1. Connectors, switch and potentiometers are IP67. The housing of ULA-1 is full sealed to IP55 ingress protection class.
Form, Design and Ergonomics
Aluminium alloy and carbon composite were used for the construction of the ULA-1 , thanks to which the weight of the fixture is up to 200g. The LED matrix is placed on a hinge allowing it to set at any angle, as well as the folding of the matrix when the light is not used. The proper friction force of the hinge can be adjusted via the adjusting screw. Thanks to the hinge, if the lamp hookes with an obstacle, the shock-resistant LED matrix will fold itself, which minimizes the possibility of damaging the lamp and the camera, eg. when getting into the car or passing with the camera through low or narrow passages.
Mounting and Accessories
The ULA-1 light could be configured to the needs by using the appropriate accessories set.
The Akurat 10mm Mounting Kit include10mm M3 bolts Fixture Adapter, 1/4 Thread Camera Adapter and Photo-Shoe Adapter - so that you can use your lamp in any way you like.
There are also other 10mm® Akurat accessories available, for mounting the light or other accessory at any angle, raising or lowering, as well as moving the position of the light in relation to the place of attachment to the camera. A magnetic barndoors with a diffuser for ULA-1 are also available.
The device may be powered from 6 up to 16 V. That allows to use the typical D-Tap sockets found in cameras powered 14.4 V or 7,4V batteries equipped with DC socket commonly used for powering cameras (in eg. SWIT or compatible), gel batteries (6 and 12 V), electrical systems of cars and motorcycles, mains power supplies etc.
Luminous flux of up to 1060 lm (from 0,6m)
Light beam angle: 120 degrees
CCT Range 3200-5600K
Maximum electric power: 11 W
Absolute maximum power voltage: 18 V
Supply voltage: 6-16 V
Size: 105 x 130 x 58 mm
Highly robust, resistant to shocks dust and water IP55
Moving and folding LED matrix
Step-less colour temperature adjustment capability
No flickering at all, suitable for slow-motion filming
Power can be supplied directly from camera batteries or D-Tap sockets