This shop uses cookies and other technologies so that we can improve your experience on our sites. close

Shop>Tripods And Accessories>Accessories>HGO-3 Rotational Fluid Head

HGO-3 Rotational Fluid Head

246,00 €  ( 200,00 € tax excl. 23% VAT )



New product

Delivery in Europe 2-5 days

Set includes:

  • Slidekamera HGO-3 rotational fluid head
  • Three M5 x 25 screws
  • Four M4 x 12 screws
  • 4mm Allen key L type
  • 5mm Allen key L type
  • AF-12 LG reduction 3/8" mandrel
  • User Manual

Slidekamera HGO-3
rotational fluid head is used for smooth regulation of the rotation as well as smooth change of the rotation resistance of HKR-1, HKR-4, HKR-6 camera cranes, Slidekamera devices S and HSK series and other accessories. Our head is equipped with a knob that regulates the rotation of the mounting plate. Double bearing provides high load capacity, rigidity and precision of rotation. In addition, grease inside the head increases resistance during rotation and eliminates internal clearances.

HGO-3 head mounting plate is equipped with a number of holes that allow to mount various accessories in a variety of combinations, thus providing great configuration possibilities and universality of our product.

Table showing configuration possibilities of Slidekamera HGO-3 rotational fluid head:

HEAD MOUNTING PLATEMounting holeDedicated deviceScrews
Four M4 holes 
3/8" central hole
Slidekamera HKR-1 Camera craneAF-12 LG reduction 3/8" mandrel
Four M4x12 screws
Four M4 holes 
3/8" central hole
Slidekamera HKR-4, HKR-6 Camera craneFour M4x12 screws
3/8" x 1" screw with a spacer
Four M4 holes 
(Manfrotto spacing)
Slidekamera AKC-3 Adapter
Manfrotto adapter
Four M4x12 screws
3/8" central holeSlidekamera device S or HSK series through Slidekamera AF-8 lower portAF-12 LG reduction 3/8" mandrel
HEAD BASEThree M5 holesSlidekamera HST-2 TripodThree M5x25 screws
Three M5 holesSlidekamera AF-16 AdapterThree M5x30 screws
3/8" central holeSlidekamera HCZ Socket*Slidekamera HSZ-2 
quick mounting screw
Three M5 holesSlidekamera AF-18 Leveling adapterThree M5x12 screws

* Slidekamera HCZ socket is attached to HST-2 tripod with three M6 screws.


Application:for smooth regulation of the rotation of Slidekamera devices
Bubble level:1
Panoramic rotation:360°
Front tilt:n/a
Safety Payload:80kg
Tripod mounting:3/8" threaded screw
Mounting accessories:3/8" threaded screw

NOTE: Slidekamera HGO-3 rotational fluid head is NOT A VIDEO HEAD and it is not suitable for working with your camera or photo camera.

NOTE: Please note that when Slidekamera HKR-1 crane is mounted on HGO-3 rotational fluid head the resistance will be greater due to the fact that HKR-1 crane is lighter than HKR-4 or HKR-6 camera cranes. Consequently, the crane will not move as smooth as it is in case of HKR-4 and HKR-6 cranes that are heavier. For smaller head rotation resistance we recommend using Slidekamera HGO-2 rotational head with HKR-1 camera crane.

Write a review

HGO-3 Rotational Fluid Head

HGO-3 Rotational Fluid Head

Related products

Product successfully added to your shopping cart


There are 0 items in your cart. There is 1 item in your cart.

Total products (tax incl.)
Total shipping (tax incl.)
Total (tax incl.)
Continue shopping Proceed to checkout